How to Charge Logitech G PRO X Superlight & Superlight 2

To charge a Logitech G PRO X Superlight or Superlight 2, use the correct cable for your generation: the original G PRO X Superlight uses Micro-USB, while G PRO X Superlight 2 models use USB-C. You can also use Logitech POWERPLAY with a compatible POWERCORE puck, or a third-party dock or Qi module that explicitly lists your exact mouse model.

Which charging accessory should I buy for my SUPERLIGHT?

Your question	Choose or check
I want a dock without installing another module.	For a listed compatible model, use the EnergyFort RGB dock: remove the original bottom cover and place the mouse directly on the dock. No extra conversion module is required.
I want a Qi pad and know what is included.	The EnergyFort Qi kit includes a replacement module, charging pad and cable. Install its supplied module; a USB wall adapter and mouse are not included. This is parked charging, not POWERPLAY charging while moving the mouse.
I want front-port charging that can reach 100%.	Use a cable or the EnergyFort magnetic wired dock. Select Micro-USB for the original SUPERLIGHT and USB-C for SUPERLIGHT 2 / 2 DEX; check physical tip clearance.
The mouse LED is off. Is charging broken?	With RGB bottom charging or the Qi kit, the mouse charging LED remains off; use G HUB to check charging. Front-port wired charging follows the mouse's wired indicator behavior.

On compatible Logitech mice, EnergyFort RGB bottom charging and the EnergyFort Qi kit may pause around 85% as the mouse manages charging protection. The exact level varies by model and conditions; it is not a fixed dock-controlled cutoff. Check Logitech G HUB for battery and charging status. This does not apply to the EnergyFort magnetic dock, which charges through the front USB-C or Micro-USB port and can charge to 100%.

Compare RGB, Qi and magnetic charging side by side before ordering.

Check charging separately from the wireless connection

Charging a SUPERLIGHT and connecting it wirelessly are separate tasks. Keep the correct receiver and pairing setup for your mouse. A charging dock or replacement Qi module should not be assumed to replace a LIGHTSPEED receiver.

1. Confirm the exact mouse generation and cable connector.
2. Check direct cable charging and the battery reading in G HUB first.
3. If direct charging works, inspect the dock contacts or module fit and pad alignment.
4. If direct charging fails too, try a known-working suitable cable and USB source before replacing the accessory.

If you want charging during normal mouse movement, compare the compatible POWERPLAY system. A stationary Qi pad or upright dock is intended for parked charging.

Confirm which Superlight you own

The first-generation G PRO X Superlight uses a Micro-USB charging connection, while G PRO X Superlight 2 models use USB-C. The underside puck and accessory compatibility can also vary. Read the model name on the base label or packaging rather than identifying the mouse by appearance alone.

Four ways to charge a G PRO X Superlight

1. Direct cable charging

Cable charging is the most dependable starting point and requires no replacement puck. Match the connector to the mouse, connect it to a suitable USB power source, and check the battery level in Logitech G HUB. A higher-wattage phone or laptop charger does not make the mouse charge beyond its designed input.

2. Logitech POWERPLAY

POWERPLAY is Logitech’s proprietary charging mouse-pad system. Compatible mice use a POWERCORE module and can receive power while moving across the pad. It is not a standard Qi pad, and a Qi receiver module should not be described as POWERPLAY compatible unless the manufacturer states that explicitly.

3. Upright charging dock

An upright dock provides a fixed place to park the mouse between sessions. Compatibility depends on the dock’s charging interface and the exact mouse generation. For the EnergyFort RGB dock, remove the original bottom cover on a listed compatible Logitech model; no replacement puck is required. The EnergyFort Qi kit requires its supplied module, while the magnetic wired dock uses a front-port tip. Check the individual product's setup and model list.

4. Qi replacement module

Some third-party kits replace the underside puck with a Qi receiver so the mouse can charge while stationary on a standard Qi pad. This can be convenient, but it is not continuous charging during play and may add weight. Confirm module fit, pad alignment and the seller’s exact model list.

Charging option comparison

Before buying a dock or module

• Verify the full model name, not only “Superlight.”
• Check Micro-USB versus USB-C.
• Confirm whether the accessory replaces the underside puck or uses a cable connector.
• Read the included-items list; the mouse, Qi pad or POWERPLAY mat may not be included.
• Use the product page’s current compatibility list as the final buying reference.

Common charging problems

If the mouse does not charge, test the original cable and another USB port first. Clean dry contact surfaces, reseat any removable module, remove protective film, and check that the mouse is aligned correctly. If direct cable charging also fails, troubleshoot the cable, port and mouse before blaming the dock.

Frequently asked questions

Can I charge G PRO X Superlight with a phone charger?

A suitable USB power source can be used with the correct cable, but the mouse controls its own charging input. Extra charger wattage does not force faster charging.

Does the first Superlight use USB-C?

No. The original G PRO X Superlight uses Micro-USB; Superlight 2 models use USB-C.

Is POWERPLAY the same as Qi?

No. POWERPLAY is Logitech’s proprietary mouse-pad system. Standard Qi charging uses a different receiver and charging pad.

Can the mouse charge while I play?

Direct cable charging and a compatible POWERPLAY setup can allow use while charging. A stationary dock or Qi pad normally charges while the mouse is parked.

Does every Superlight dock fit Superlight 2?

No. Connector, puck and fit differences mean the exact generation must be listed.

Do I need to remove the original bottom cover?

For the EnergyFort RGB dock, remove the original removable bottom cover on a listed compatible Logitech model and place the mouse directly on the dock; no extra conversion module is required. The EnergyFort Qi kit instead requires its supplied replacement module. Follow the instructions for the specific accessory and keep the original cover.

Why is my mouse not charging on the dock?

First check the exact model, USB power and alignment, then check G HUB. The RGB dock does not require an extra module; the Qi kit requires its supplied replacement module. A dark mouse LED during bottom charging does not by itself mean charging has failed.

Is a dock necessary for the Superlight?

No. The original cable is sufficient. A dock is mainly a convenience and desk-organization accessory.

Does the charging accessory include the mouse?

No, unless a listing explicitly says otherwise. EnergyFort accessory listings do not include the Logitech mouse.

Related guides for your next decision

• Choose a Logitech Qi module and pad
• Dock vs pad: choose by your charging routine
• SUPERLIGHT 2 feet: separate model-fit considerations

Final verdict

Start with the exact Superlight generation. Cable charging is simplest; POWERPLAY suits users who want compatible in-use charging; an upright dock offers compact parking; and a Qi module is a separate stationary charging route. The right choice depends on interface and verified compatibility, not the Logitech name alone.

Related: Mouse Charging Dock vs Charging Mouse Pad and G502 X Plus Charging Dock Guide.

Compatibility notice: Logitech, Razer, POWERPLAY and related product names are trademarks of their respective owners. EnergyFort is an independent third-party accessory brand and is not affiliated with, authorized by, or endorsed by Logitech or Razer. Model names are used only to identify compatibility.