Which EnergyFort Mouse Charging Dock Fits MX Master 3S, SUPERLIGHT and Viper V3 Pro?
Short answer: EnergyFort lists MX Master 3S and Razer Viper V3 Pro for its front-port magnetic wired dock. G PRO X SUPERLIGHT and SUPERLIGHT 2 are listed for that dock, the RGB bottom-contact dock and the Logitech Qi kit. These systems use different connections and installation methods.
Choose by exact mouse model
| Mouse | Listed EnergyFort options | Key check |
|---|---|---|
| Logitech MX Master 3S | Magnetic wired dock | Match the selected tip to the actual port and clearance. Not listed for RGB or Qi. |
| G PRO X SUPERLIGHT | Magnetic dock, RGB dock, Qi kit | Choose front-port charging, bottom contacts or replacement Qi module. |
| G PRO X SUPERLIGHT 2 | Magnetic dock, RGB dock, Qi kit | Check the complete generation and suffix on each listing; do not assume all variants match. |
| Razer Viper V3 Pro | Magnetic wired dock with USB-C tip | Not listed for RGB or Logitech Qi. Not listed does not mean proven incompatible. |
Three different charging setups
Front-port magnetic wired dock
The magnetic dock charges through the front port using a selected USB-C or Micro-USB tip. It is not Qi and needs no replacement bottom module. The tip options are sold separately. The approximately 10 cm magnetic cable is intended for stationary charging between sessions, not active mouse movement.
The package includes the dock, USB-A to USB-C cable, short magnetic cable, selected tip, ejection tab and manual. Verify port depth and clearance; never force a connector.
RGB bottom-contact dock
For a listed Logitech mouse, remove the original bottom cover and align the contacts directly on the RGB dock. No extra conversion module is required. These Logitech steps do not establish installation for every Razer model.
The standard package includes the dock, 2 m USB-C to USB-C data cable and manual. An RGB Flow Cable option adds a 1 m flow-light cable.
Logitech Qi kit
Install the supplied replacement bottom module, then park the mouse on the included Qi pad. The kit includes the module, pad and USB-A to USB-C cable. It lists selected Logitech models only; Razer compatibility is not established. It is not compatible with POWERPLAY and does not provide continuous charging while moving across a gaming surface.
Frequently asked questions
Does magnetic mean Qi wireless charging?
No. The magnetic dock uses a wired connection through the mouse charging port. The Qi kit uses its supplied replacement module and pad.
Are both magnetic tips included?
No. USB-C and Micro-USB are separate options. Select the version matching your actual mouse port and physical clearance. EnergyFort explicitly specifies USB-C for Viper V3 Pro.
Can the RGB dock charge MX Master 3S or Viper V3 Pro?
Neither is listed on the current RGB product page. The magnetic wired dock lists both. Check the selected product rather than assuming compatibility across charging systems.
Why does Logitech charging pause below 100%?
EnergyFort reports pauses around 80–90% in compatible bottom-charging setups; the level varies and is not a guaranteed cutoff. Check Logitech G HUB instead of relying on the mouse LED alone.
What should I check before ordering?
Confirm the full model and generation, selected charging system, connector clearance, installation method and package option. Compatibility here follows EnergyFort product listings reviewed October 30, 2026; recheck the current listing before purchase.
Compare all EnergyFort mouse charging docks or contact support with your exact model.
